Filter
Top Products
79
Active Emulation Menu
The ACTIVE EMULATION menu determines what emulations are available.
• PCL-II. The default. The PCL-II emulation is active.
• LP PLUS. Allows you to select LinePrinter Plus as the active emulation. If
LP PLUS is the active emulation, you can select Epson, Proprinter III XL,
or P-Series as the printer protocol (see page 86).
• IGP/PGL & LP+ and IGP/VGL (Code V) & LP+. The ACTIVE
EMULATION function also allows you to activate either the PGL or the
Code V emulation. There are two methods for selecting the desired
emulation. The first is by selecting the emulation directly from the printer
menu. The second is by sending a host command which will switch the
emulation automatically. See the appropriate Technical Reference
Manual for more information on these command codes.
When changing from one IGP emulation to the other, the printer will load
the power-up configuration. Thus, any setting performed before selecting
those emulations and not saved in flash memory will be lost.
For more information on IGP/PGL and Code V, see the appropriate
Technical Reference Manual.
ACTIVE
EMULATION
PCL-II*
LP PLUS
IGP/PGL &
LP+
1
IGP/VGL
(CODE-V) &
LP+
1
Note To configure an IGP emulation, the IGP emulation must be selected in the
ACTIVE EMULATION menu. The IGP emulation that is not selected will
not appear in the EMULATION menu.