Filter
Top Products
84
Chapter 4 Emulation Menu
PTX Linefeed
• Disable. The default. Linefeed is to be performed as calculated from the
bottom of the graphics or barcode, thereby disrupting the vertical text
alignment.
• Enable. The Linefeed moves to the next line as calculated from the Top
of Form position, thereby retaining vertical text alignment. When printing
graphics or bar codes, you may want to set the PTX Linefeed parameter
to Enable to maintain text alignment.
LPI Adjust
This parameter lets you specify the lines per inch (lpi) values: 6 LPI (the
default) or 8 LPI.
Page L. /Lines
This parameter lets you set physical page length in lines from 12 to 96 at 6 lpi,
or 16 to 128 at 8 cpi. The default is 66 lines at 6 lpi.
Page L. /Inches
This parameter allows you to set physical page length from 2 to 16 inches, in
increments of half an inch. The default is 11 inches.
Config. Print
This option prints the emulation's parameters and the currently selected
values.
Linefeed
LINE 1
Linefeed
LINE 2
LINE 3
LINE 1
LINE 2
LINE 3
PTX Linefeed Enabled PTX Linefeed Disabled
Note If 6 lpi is selected, you will be able to scroll the menu to 128 (an invalid
length). However, when you press ENTER to select this value, the menu
will return with the maximum lines for 6 lpi (i.e., 96 lines). Similarly,
selecting too few lines for 8 lpi will cause the menu to return with 16 lines.