Filter
Top Products
186
Chapter 9 Windows Host Configuration
Windows 95/98/ME Host Setup
To configure a new printer on a Windows 95 station:
1. Select “Settings:Printers” from the Start menu.
2. Double click on the “Add Printer” icon.
3. Select “Network Printer” from the second window of the Add Printer
wizard that loaded.
4. At the next window, click on BROWSE to help fill in the network path of
this printer.
5. At the “Browse for Printer” dialogue box that displays, double click on the
appropriate workgroup containing the NIC. By default, the print server
falls under the workgroup, “WORKGROUP.”
6. Continue searching the network until you see the NIC name,
M_xxxxxx,
where
xxxxxx equals the last six digits of the print server Ethernet
address found when a configuration is printed.
7. Once you see the NIC, double click on it to display a list of pre-defined
destinations/queues to choose from.
8. Select a destination/queue that will use d1prn.
9. Click OK once you have selected a destination.
10. Back at the network path window, select NEXT since this path should now
be filled in for you.
11. At the next window, select the appropriate print driver and click on NEXT.
12. Fill in a name for this new network printer at the next window and decide if
you want this to be the default printer. This printer name can be anything
you would like as long as it is unique.
13. When prompted for a test page, select either “Yes” or “No” depending on
the state of the attached printer and click on FINISH.
Windows may ask for a disk or CD-ROM to load the appropriate printer driver
to complete this new printer setup.
There should now be a new printer icon within the Printers folder. This new
network printer relies on NetBIOS over TCP/IP as the underlying protocol to
print to the NIC.