Filter
Top Products
Section 9: Factory Resets
M84Pro Service Manual PN 9001111A Page 9-3
11 Press the FEED key to test print. Press the FEED key again to stop printing.
12 Verify that the counters on the test print have reset to 0.0 km.
13 Power Off the printer and confirm that all switches are in the Off or down position.
CLEAR DISPENSER COUNTER
1 Record all dip switch positions.
2 Place all dip switches in the OFF position.
3 Place the DSW2-4 in the ON position.
4 Simultaneously, press and hold the LINE and FEED keys while turning on the power switch.
5 Release the LINE and FEED keys upon hearing a beep.
6 Place the DSW2-4 in the Off position.
7 Press the FEED key to display the next screen.
8 Press the LINE key twice to change the message from NONE to DIS.
9 Press the FEED key to clear the dispenser counter.
10 Select the print label size by pressing the LINE key.
11 Press the FEED key to test print. Press the FEED key again to stop printing.
WARNING: THIS TEST ACTIVATES ALL THE HEATING ELEMENTS ON
THE PRINT HEAD AND THEREFORE SHOULD BE USED FOR TESTING
PURPOSES ONLY. FULL WIDTH LABELS MUST BE USED TO PREVENT
PRINT HEAD DAMAGE.
CAUTION: RESETTING THE PRINTER WILL CLEAR ALL REGISTERS.
LCD DISPLAY: INITIALIZING ROM V00.00.00.00
MAINTENANCE MODE DIPSW2-4 ON->OFF
LCD DISPLAY: FACTORY MODE
LCD DISPLAY: COUNTER CLEAR - NONE
LCD DISPLAY: COUNTER CLEAR - DIS
LCD DISPLAY: PRINT SIZE
SMALL L
ARGE
NOTE: The default selection is large. The LINE key allows scrolling from one
option to another.