Filter
Top Products
Section 5: Printer Configuration
M84Pro Service Manual PN: 9001111A Page 5-10
CONFIGURATION MODES
MODE KEY SEQUENCE INITIAL DISPLAY
Normal POWER ONLINE QTY:000000
Advanced LINE + POWER ADVANCED MODE
Test Print FEED + POWER TEST PRINT MODE
CONFIGURATION
Default Setting LINE + FEED + POWER DEFAULT SETTING YES NO
Clear Non-Standard Protocol DSW2-7 ON + LINE + FEED + POWER ALT. PROTOCOL
Protocol Code Download DSW2-7 ON + POWER + LINE USER DOWNLOAD
Hex Dump DSW2-4 ON + POWER ONLINE QTY: 000000
NORMAL MODE
The printer initially powers on in the ONLINE mode. The user can access the User Settings using the
following procedures.
LCD DISPLAY DEFINITION
V 05.00.03.00
INITIALIZING
Displays the firmware during the initialization.
ONLINE
QTY:000000
The LCD will display the ONLINE status on the top line and the label quantity
(QTY) status on the bottom. The message will be changed to OFFLINE
whenever the printer is switched offline by pressing the LINE key. When a
print job is received, the quantity line will indicate the number of labels to be
printed. As the label job prints, the display will indicate the number of labels in
the print job that remains to be printed.
OFFLINE
000000
Press the LINE key once. When the display changes to OFFLINE, press the
FEED and LINE keys simultaneously for more than one second and release.
PRINT DARKNESS
12 345
The LCD now displays the Print Darkness selections. The current setting is
indicated by a cursor over one of the range settings. There are 5 possible
selections. The lowest setting represents the lightest print and the highest
setting the darkest print.
1. Press the Cursor keys to step the cursor to the desired option.
2. Press the ENTER key to select the option and advance to the next display
PRINT SPEED
2 4 6 8 10
The current setting is indicated by the cursor.
1. Use the Cursor keys to step the cursor to the desired option.
2. Press the ENTER key to select the option and advance to the next display