Filter
Top Products
Section 5: Printer Configuration
M84Pro Service Manual PN: 9001111A Page 5-6
Back-Feed Selection (DSW3-4): When Back-Feed is enabled, the printer will position the last
printed label for dispensing and retract it before printing the next label. The amount of backfeed
offset is adjustable.
External Signal Interface: Refer to the Interface Specifications section for information on
External Signals.
EXT Print Start Signal Selection (DSW3-5): Allows an external device to initiate a label print for
synchronization with the applicator or other external device. When DSW3-5 is On, the unit is in
the Continuous print mode, Backfeed is disabled and External Signals are ignored.
External Signal Type Selection (DSW3-6, DSW3-7): Both the polarity and signal type (level or
pulse) of the external print synchronizing signal can be selected.
DSW3-4 SETTING
Off Enabled
On Disabled
DSW3
ON
OFF
12345678
DSW3-5 SETTING
Off Disabled
On Enabled
DSW3
ON
OFF
12345678
DSW3-6 DSW3-7 SETTING
Off Off Type 4
Off On Type 3
On Off Type 2
On On Type 1
DSW1
ON
OFF
12345678