Filter
Top Products
Section 9: Factory Resets
M84Pro Service Manual PN 9001111A Page 9-5
12 Verify that the counters on the test print have reset to 0.0 km.
13 Power Off the printer and confirm that all switches are in the Off or down position.
CLEAR EEPROM
1 Record all dip switch positions.
2 Place all dip switches in the OFF position.
3 Place the DSW2-4 in the ON position.
4 Simultaneously, press and hold the LINE and FEED keys while turning on the power switch.
5 Release the LINE and FEED keys upon hearing a beep.
6 Place the DSW2-4 in the Off position.
7 Press the LINE key to display the next screen.
8 Press the FEED key once to display the next screen.
9 Press the FEED key once to display the next screen.
10 Press the LINE key to scroll to YES.
11 Press the FEED key to clear the EEPROM.
12 Power Off the printer and confirm that all switches are in the Off or down position.
WARNING: THIS TEST ACTIVATES ALL THE HEATING ELEMENTS ON
THE PRINT HEAD AND THEREFORE SHOULD BE USED FOR TESTING
PURPOSES ONLY. FULL WIDTH LABELS MUST BE USED TO PREVENT
PRINT HEAD DAMAGE.
CAUTION: RESETTING THE PRINTER WILL CLEAR ALL REGISTERS.
LCD DISPLAY: INITIALIZING ROM V00.00.00.00
MAINTENANCE MODE DIPSW2-4 ON->OFF
LCD DISPLAY: FACTORY MODE
LCD DISPLAY: ALL CLEAR MODE
LCD DISPLAY: ALL CLEAR COUNTER
EEPROM
LCD DISPLAY: COUNTER ALL CLEAR
YES NO