Filter
Top Products
Index
H9 ASD Installation and Operation Manual 271
Symbols
0 Hz Command Output, 125
0 Hz Dead Band Signal, 124
16-Bit Binary/BCD Input, 87
A
Abnormal Speed Detection Time, 187
Abnormal Speed Settings, 52
Acc/Dec #1 – #4 Settings, 56
Acc/Dec Pattern 1, 165
Acc/Dec Pattern 1 – 4, 167
Acc/Dec Pattern 2, 166
Acc/Dec Special, 56
Accel/Decel #1 Settings, 46
Accel/Decel Operation After Torque Limit, 159
Accel/Decel Suspend, 144
Accel/Decel Switching Frequency 1, 167
Acceleration, 80
Acceleration Suspend Frequency, 145
Acceleration Suspend Time, 145
Acceleration Time 1, 80
Acceleration Time 2, 164
Acceleration Time 3, 168
Acceleration Time 4, 169
Acceleration/Deceleration Pattern 3, 169
Acceleration/Deceleration Pattern 4, 170
Acceleration/Deceleration Switching Frequency 2, 169
Acceleration/Deceleration Switching Frequency 3, 170
Adding Input Selection, 193
AI2, 88
AI2 (Option V/I) Input Bias, 163
AI2 (Option V/I) Input Gain, 163
Alarm Prohibition, 50
Alarms, 246, 247
Always ON 1 Terminal 1, 88
AM, 21, 23
AM Bias Adjustment, 197
AM Output, 43
AM Output Gradient Characteristic, 197
AM Output Terminal Adjustment, 194
AM Output Terminal Function, 194
AM/FM Output, 25
Analog Filter, 54
Analog Function Assigned Object 11, 228
Analog Function Assigned Object 21, 229
Analog Input Filter, 109
Analog Input Function Target 11, 228
Analog Input Function Target 21, 228
Analog Output Terminals, 47
Annual Average Ambient Temperature, 191
ASD Capacity, 13
ASD Input Phase Failure Detection, 184
ASD Load, 43
ASD Number, 205
ASD OL (Overload) Trip, 43
ASD Operation at Disconnect, 212
ASD Output Phase Failure Detection, 183
ASD Overload, 43, 189, 254
ASD-side Switching Wait Time, 147
ASD-to-ASD Communications (2-wire), 206, 209
Atn, 247
At-trip Recorded Parameters, 255
Auto Accel/Decel, 71
Auto Restart, 133
Automatic Acceleration/Deceleration, 76
Automatic Function Selection, 85
Automatic Light-Load High-Speed
Operation Frequency, 141
Automatic Torque Boost, 76
Autotune Error, 252
Autotuning, 10
Autotuning 1, 151
Autotuning 2, 152
B
Base Frequency 1, 81
Base Frequency 2, 98
Base Frequency 3, 99
Base Frequency 4, 100
Base Frequency Voltage, 52
Base Frequency Voltage 1, 152
Base Frequency Voltage 2, 98
Base Frequency Voltage 3, 99
Base Frequency Voltage 4, 100
Baud Rate (2-wire RS485), 204
Baud Rate (4-wire RS485), 208
Bezel Mounting Hardware, 33
BIN Input Point 1 Frequency, 121
BIN Input Point 1 Setting, 120
BIN Input Point 2 Frequency, 121
BIN Input Point 2 Setting, 121
Block Read Data 1, 214
Block Read Data 2, 214
Block Read Data 3, 214
Block Read Data 4, 215
Block Read Data 5, 215
Block Write Data 1, 213