Filter
Top Products
40 H9 ASD Installation and Operation Manual
9 — Option V/I
This setting allows for the use of the optional voltage/current frequency-control interface.
10 — UP/DOWN Frequency
A discrete terminal may be configured to increase or decrease the speed of the motor by
momentarily connecting the assigned terminal to CC. See
F264 on pg. 128 for further
information on this feature.
11 — Pulse Input Option
This setting is used to allow the system to use a pulsed input for frequency control. See PG
Input Point 1 Setting on pg. 122 for further information on this feature.
12 — Pulse Input (motor CPU)
This setting is used to allow the system to use a pulsed input for frequency control. See PG
Input Point 1 Setting on pg. 122 for further information on this feature.
13 — Binary/BCD Input Option
Allows for discrete terminal to be used for frequency-control input.