Filter
Top Products
Xerox Document Centre Reference Guide Page 6 - 23
6. Network Scanning
(Optional Feature)
6. Network Scanning
(Optional Feature)
Service Access Control
Service Access Control allows you to leave the Document Centre
open or configure the system so users cannot initiate a service unless
authentication is provided.
You can choose to allow the system to be:
1. Open. This means that any user can approach the system and
initiate any service without network Authentication. This setting
is independent of any accounting access that may be required by
the system.
2. Guest Mode Only. This requires the user to enter a system
passcode to access the protected system functions.
3. Network Authentication Only. This requires a user to enter at
least a user name and password based on the authentication
environment selected by the Machine Administrator.
Refer to Tools page 44 to enable or disable network
configuration settings.
4. Both Guest Mode and Authentication Mode.
NOTE
If a system is set to require network authentication, you may also
choose to enable Guest Mode With Passcode. This will allow the
users the option of authentication mode.
Tools Screen 1
Tools Screen 2
How to get here
More
Service
Tools Screen 3
More
Access
Control