Filter
Top Products
Page 10 - 18 Xerox Document Centre Reference Guide
Standard Size Required
This feature determines which paper sizes are selected when Auto
Paper is used during a copy job and the paper that is available in the
machine is not within 0.2 inches of the size of the output image.
If paper is available that is within 0.2 inches of the size of the output
image, that paper automatically will be selected and used regardless
of which Standard Size option is selected.
Standard Size refers to the following sizes: 8.5 x 11 inch, 8.5 x 14
inch, or 11 x 17 inch.
1. If the output image is within 0.2 inches of a standard size and
there is no paper loaded that is the same size as the output image
and:
Standard Size Required is On, the job will not be printed.
The user will be instructed to load the required paper size,
select a different paper, or Reduction/Enlargement value
(R/E%).
Standard Size Required is Off, the job will run, using the
smallest paper that will hold the entire output image. If no
paper is large enough, the user will be instructed to load a
larger paper or to change the R/E%.
2. If the output image is not within 0.2 inches of a standard size, the
machine will run the job, using the smallest paper that will hold
the entire output image. If no paper is large enough, the job will
not be printed. The user will be instructed to load a larger paper
or to change the R/E%.
Tools Screen 1
System Settings 1
Tray
How to get here
Tray Management
Standard Size
System Settings
Management
Required