Filter
Top Products
Page 12 - 22 Xerox Document Centre Reference Guide
Relocating your Document Centre
Moving your Document Centre to a new location on the same floor
or a different floor through elevator can be handled without
assistance from Xerox. Contact Xerox to arrange a move to a
different building.
Use the following procedure to relocate a Document Centre:
Power-off the machine and disconnect the telephone cord,
power cord and any network connections.
Unlock the right wheel casters by pressing the lever on each
wheel up. To enable better steering and avoid tipping, the
machine is designed to be moved left to right with the right
casters in an unlocked position. Do not attempt to unlock the
left casters.
Pushing on the right side of the machine (the side with the
swivel casters) will make it easier to steer it. Do not push
against the Document Feeder as this may damage the
machine.
Ensure that the minimum space requirements diagrammed
on the following page and that the ozone requirements
detailed on page 1-4 are met. The dimensions assume a
moveable installation (carpet no deeper than 0.25 inch or 7
mm). The wall outlet must be installed near the equipment
and be easily accessible.
Plug in the phone line and the power cord and reestablish
the network connection if necessary. Power on the machine.
Reenter the machine telephone number if it has changed and
inform the Welcome Center of the new number.
Lock the casters in position by pressing the caster wheel
lever down.