Filter
Top Products
Page 10 - 22 Xerox Document Centre Reference Guide
Timers
System Timeout controls the time interval between the last action
at the User Interface and when the Touch Screen resets to the default
settings.
When you press the System Timeout button you can set the time
from 1 to 10 minutes in 1 minute increments or disable the timer.
The default time is 1 minute.
Auto Resume controls the time interval between when a job is
paused using the Pause button and when printing is resumed.
When you press the Auto Resume button you can set the time from
15 seconds to 2 minutes in 15-second increments (0.25 min.) or
disable the timer. The default time is 30 seconds.
Incomplete Scan controls the time interval between a job that is
only partially scanned into memory and its deletion from memory.
This occurs when a job is partially scanned into memory and the
documents are removed from the Document Feeder.
The job will be deleted from memory based on the value set in this
feature.
When you press the Incomplete Scan button you can set the time
from 1 to 10 minutes in 1-minute increments or disable the timer.
Default time is 3 minutes.
External devices connected to the Document Centre also share this
timer. If a job using an external attachment is prevented from
operating by the external device and it is not allowed to resume, it
will be deleted when the timer expires.
Tools Screen 1
System Settings 1
Timers
How to get here
System Settings