Filter
Top Products
Page 10 - 12 Xerox Document Centre Reference Guide
Tray Management
There are several selections on this screen.
Tray Settings allows you to program trays as Fully Adjustable,
Dedicated, or on a DC model, Size Only. You can also set tray
priorities and enable Auto Selection.
Stock Settings allows you to set the stock size, color, or type
for Dedicated trays only.
Default Stock is where you set the stock type and color.
Standard Size Required is used to control machine operation
when Auto Paper is used to select a paper size. If this feature is
On, only standard size papers can be selected automatically
when Auto Paper is selected. If this feature is Off, any paper on
which the entire image will fit can be used.
Paper Substitution allows the automatic substitution of US
and metric equivalent paper sizes for network print jobs. For
example, 8.5 x 11 inch paper will be automatically substituted
for A4 paper when 8.5 x 11 inch paper is not available in the
machine.
Some image loss may occur. Refer to page 10-17 for more
information. This feature is not available on the DC models.
NOTE
In ST models, in order for the system to print error and
configuration reports correctly, at least one tray must be loaded
with 8.5 x 11 inch paper and Auto Selection should be enabled.
Tools Screen 1
System Settings 1
Tray
How to get here
System Settings
Management