Filter
Top Products
Page 10 - 10 Xerox Document Centre Reference Guide
System Settings Screen 3
System Settings Screen 3 options may vary depending on machine configuration.
Contention Management
Refer to page 10-32
Sets the priority in the queue for copy and print jobs.
Output Options
Refer to page 10-34
Where the adjustments are made to the quantity of thin
stapled sets that are produced before the machine
automatically pauses.
You can enable or disable the feature that separates
printed sets within a job.
Controls what happens when stapled sets are selected
and the machine runs out of staples. Options are to
continue and to produce unstapled sets or hold the job
until staples are replenished.
You can also select the tray, either the top or the main,
to send completed non-stapled jobs such as Print, Copy
or Other jobs.
Image Rotation
Refer to page 10-31
Enables the automatic image rotation when Auto% or
Auto Paper is selected.
Electronic Hole Removal
Refer to page 10-36
Enables the removal of the black circles left when
copying a document that has punched holes. Originals
must be placed in the Document Feeder.
Single Job Mode
Refer to page 10-33
Limits the job queue by allowing one copy job at a time.
(DC models only).