Filter
Top Products
Page 10 - 2 Xerox Document Centre Reference Guide
System Management Tools Overview
The System Management Tools allow you to customize, and
maintain, the Document Centre. This collection is commonly known
simply as Tools. Using Tools, you can:
Change the factory settings or defaults for a variety of
features; for example, tone loudness, specific programming
features, and Power Saver Administration.
Perform basic maintenance tasks; for example, adjusting
screen brightness or resetting the software.
Perform a variety of system tests, typically with assistance
from Xerox.
To enter Tools, press the Access button, located on the upper right-
hand corner of the User Interface, and enter the password of 1111.
If you have an ST Model, Select Go to Tools. On a DC model with
Auditron active, press Tools Pathway after you enter the password.
On a DC model without an active Auditron you will immediately
access the Tools functions after you enter the password and press
enter.
NOTE
The factory preset password for Tools is 1111. It is strongly
recommended that you change the password. Refer to page 11-14 to
learn how to change the Tools password.
The following tables describe the Tools screens and list reference
points within this document for additional information.
User Interface
Press here to access Tools
Default password 1111