Filter
Top Products
Section 5 Other Features of this Fax
5-26
Set the documents you want to transmit.
Use the keypad to enter the fax number of a relay station.
* You can also enter the fax number using one-touch keys
that have been designated for F-Code Based
Communication as well. If you do use such a one-touch
key, press the Start key and the transmission operation
will begin automatically.
(inch)
(metric)
Press the “Subadd.” key.
(inch)
(metric)
Press the “On” key.
Use the keypad to enter the appropriate subaddress.
* This subaddress is required during an F-Code Based
Communication in order to designate the box in the
destination party's fax. It can be up to 20 digits in
length and can include any combination of the numerals
0 - 9.
* You can use the “” and/or “” keys to move the cursor
to a desired location, and you can clear the entered
number by pressing the “Delete” key.
(inch)
(metric)
Press the “Password” key.
If necessary, use the keypad to enter the predetermined
F-Code password.
* The password can be up to 20 digits in length and can
include any combination of the numerals 0 - 9 and the
symbols “*” and “#”.
* This password is not required if you agree in advance
with the destination party not to use one.
Press the “Close” key.
The message display will return to the same screen as
was displayed in step 2. You can now change any
transmission settings that you want or set the time for
the transmission to begin.
Press the Start key. The transmission operation will
begin.
1
2
3
4
5
6
7
8
9