Filter
Top Products
Section 5 Other Features of this Fax
5-32
Enter the other party's fax numbers.
* You can enter the fax numbers using the keypad,
abbreviated numbers, one-touch keys or the address
book. Chain dial keys can be used as well.
* If you want to enter multiple fax numbers with the
keypad, press the “Next destinat.” [“Next dest.”] key
after each fax number.
(inch)
(metric)
Press the “Finish dest. Set” [“Dest. set”] key.
Enter the desired group name. (Maximum 20 characters)
* In order to enter characters, refer to “Entering
Characters” on page 2-11.
Check the currently registered information and press the
key that corresponds to any item that you want to modify.
Press the “OK” key.
The message display will return to the same screen as
was displayed in step 3.
If you want to continue registering other group dial keys,
repeat steps 3 through 9. If you are finished registering
group dial keys, press the Reset key.
Modifying or Deleting Registered
Information
Press the “Register” key. The Registration Select screen
will appear.
(inch)
(metric)
Press the “Dial” key.
(inch)
(metric)
Press the speed-dial key (group dial key) containing the
information you want to modify or delete.
* If that key is not displayed, use the “T” and/or “S”
cursor keys to switch to the screen that displays the key
that you want.
5
6
7
8
9
1
2
3