Filter
Top Products
Section 3 Fax Operation (Various Functions)
3-16
Use the “T” and/or “S” cursor keys to switch to the
communication that you want.
(inch)
(metric)
Press the “Delete” key.
(inch)
(metric)
Press the “Yes” key. The selected communication will be
deleted and the touch panel will return to the initial mode
settings.
If you want to continue deleting other scheduled
communications, repeat steps 1 through 5.
(inch)
(metric)
Modifying the Contents of the
Communication
You can modify the information relating to a scheduled
communication that is presently saved in memory. The scheduled
time for the communication to start can be changed, destinations
changed, added and deleted, or the communication can be canceled
completely. The actual procedure and information available for
modification is slightly different depending on the type of
communication involved. The example in the procedure below is for
a scheduled Broadcast Transmission that uses the timer. If you
want to modify the information relating other types of
communications, simply refer to this example but follow the flow of
the message display in order to perform the actual procedure.
* You CANNOT modify a scheduled communication that is waiting
for Automatic Redialing, nor is it possible to modify a scheduled
Polling Communication, a scheduled transmission using the
optional Network FAX functions, a scheduled Broadcast
Transmission, or an F-code Transmission.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
Press the “Application” key. The Application screen will
appear.
(inch)
(metric)
Press the “Reserved TX status” key.
The content of the first schedule communication will be
displayed.
(inch)
(metric)
3
4
5
1
2