Filter
Top Products
Section 3 Fax Operation (Various Functions)
3-10
If you register a chain dial number under a speed-dial key in advance, that speed-dial key
will function as a chain dial key and the chain dial key can be used to enter the initial
portion of the other party’s fax number.
Example:
If the number “212” is registered under a speed-dial key (which then functions as a chain
dial key) and you want to dial the number 212-XX-XXXX, press the key under which “212”
is registered and enter the rest of the number with the numeric keys.
* You can only use chain dial keys once in a dialing sequence: to enter the initial digits of
the other party’s fax number.
* You can use chain dial keys when entering destination fax numbers in each of the various types of fax communication available in this fax
such as Broadcast Transmission.
* You CANNOT use chain dial keys in combination with group dial keys.
Registering New Chain Dial Keys
* You can register any number of the 600 speed-dial keys for use as
chain dial keys.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
Press the “Register” key. The Registration Select screen
will appear.
(inch)
(metric)
Press the “Dial” key. The touch panel will switch to dial
registration.
(inch)
(metric)
Press an unregistered speed-dial key on the touch panel.
* If there are no unregistered speed-dial keys displayed,
use the “T” and/or “S” cursor keys to switch to a screen
that displays an unregistered key.
(inch)
(metric)
Dialing the Destination With A Registered Number and the Keypad
(Chain Dial Keys)
1
2
3