Filter
Top Products
Section 5 Other Features of this Fax
5-50
Modifying or Deleting Encryption Keys
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
Perform steps 1 through 3 of “Registering New
Encryption Keys” on page 5-48.
Press the key which displays the Encryption Key you
want to modify or delete.
If you want to delete the registered Encryption Key, press
the “Delete” key and then go to the next step. If you want
to modify the registered information, press the “Change
contents” key and then go directly to step 5.
(inch)
(metric)
> Deleting an Encryption Key
Press the “Yes” key.
The message display will return to the same screen as
was displayed in step 2. If you are finished deleting
Encryption Keys, press the Reset key.
> Modifying information
Press the Stop/Clear key to delete the old key and then
enter the new Encryption Key, or use the “” and/or “”
keys to move the cursor to a desired location and reenter
the Encryption Key as desired.
(inch)
(metric)
Press the “OK” key.
The message display will return to the same screen as
was displayed in step 2. Once you are finished modifying
and/or deleting Encryption Keys, press the Reset key.
1
2
3
4
5
6