Filter
Top Products
Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
1-15
<Table codes>
The numbers and symbols shown in the table above refer to the
following:
*: During procedures that use the message display but are not
included in the initial procedures listed in the table above, the
procedure will work just like this operation.
O:The additional operation will work unconditionally with the
initial operation.
–: Unrelated to fax operation.
X: The additional operation will NOT work with the initial
operation.
U: The additional operation will work with the initial operation
under certain conditions. The adjoining numerals refer to the
following conditions:
1: Print out will be accomplished once printing is possible and the
fax is in the Fax Operation mode.
2: Direct Reception will switch to Memory Reception and print out
will be accomplished once printing is possible and the fax is in
the Fax Operation mode.
3: Printing can be stopped and copies made.
4: Settings made in the Fax Operation mode will be deleted once
the machine is switched to the Copy Operation mode.
5: It is possible to add fax default settings, but those
communication settings, etc., that have already been made will
be canceled.
6: Cannot be used with TWAIN. Scan to PC and E-Mail are
available.
7: Cannot be used with TWAIN. Scan to PC and E-Mail are
available in individual transmission modes, but not in the
continuous transmission mode.