Filter
Top Products
Section 1 Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
1-14
> Checking the status of a fax communication in progress
Press the “Status” [“Act status”] key in the bottom right of the
touch panel. The document number and information related to the
other party will be displayed. (NOTE: It is possible to cancel that
ongoing communication by pressing the “Stop” key.)
(inch)
(metric)
* Press the “Close” key to return to the previous screen.
> Checking the status of a print out in progress
Press the “Status” [“Act status”] key in the bottom right of the
touch panel.
(inch)
(metric)
* Press the “Close” key to return to the previous screen.
<When the Dual Access function is not available>
There are cases in which the Dual Access function is not available.
For example, during a fax communication to one party, you will not
be able to receive a fax from another party, nor can you perform
setting or registration procedures during any fax transmission or
reception.
In such cases, perform the desired operation after the current
communication is completed.
Refer to “z Table of Operations Available/ Unavailable under Dual
Access”, for more detailed information regarding which operations
can and cannot be performed simultaneously.
* Communications that use the timer will not be accomplished,
even upon reaching the designated time for the communication to
begin, until the current operation has been completed.
z Table of Operations Available/ Unavailable under Dual
Access