Filter
Top Products
Section 3 Fax Operation (Various Functions)
3-11
Press the “Chain” key.
(inch)
(metric)
Use the keypad to enter the desired chain dial number.
(Maximum 32 digits)
(inch)
(metric)
* “” and “” cursor keys...Use to move the cursor.
“Delete” key...Press to delete the character that the
cursor is currently under. (When the cursor is at the
last space, the previous character will be deleted.)
“Space” key...Press to enter a space.
“Pause” key...Press to enter a slight pause (indicated by
a hyphen) at that point in dialing.
Press the “Next” key.
Enter the desired name for the chain dial key. (Maximum
20 characters)
* In order to enter characters, refer to “Entering
Characters” on page 2-11.
Check the registered information. If you want to change
any portion of it, press the key that corresponds to the
desired item and change the information as desired.
(inch)
(metric)
To register this chain dial key with the entered
information as is, press the “OK” key.
The message display will return to the same screen as
was displayed in step 3.
If you want to continue registering other one-touch keys,
repeat steps 3 through 9.
If you are finished making settings, press the Reset key to
return to the initial mode.
4
5
6
7
8
9
10