Filter
Top Products
Section 3 Fax Operation (Various Functions)
3-13
Press the “Close” key.
Once you are finished modifying all of the items that you
want, press the “OK” key.
The message display will return to the same screen as
was displayed in step 3.
If you want to continue modifying other chain dial keys,
repeat steps 3 through 9.
If you are finished making settings, press the Reset key to
return to the initial mode.
Dialing With a Chain Dial Key
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
If the operation involves the transmission of documents,
set the documents you want to transmit.
Press the desired speed-dial key that was registered as a
chain dial key.
(inch)
(metric)
Enter the other party’s fax number.
* You can enter the fax number using the keypad,
abbreviated numbers, one-touch keys or the address
book.
* Once the other party’s fax number is entered, only the
registered chain dial name will be displayed, followed
by the other party’s fax number or name.
* If you want to enter the fax number once again from the
beginning during input with the keypad, simply press
the Stop/Clear key.
Press the Start key. The communication operation will
begin automatically.
8
9
1
2
3
4