Filter
Top Products
Section 7 Various Settings and Registration
7-4
The number of times the fax will “ring” before an incoming call is answered in the Auto Fax Reception mode, the Auto FAX/TEL Switching
mode [this setting is not available in metric models] or the TAD Reception mode can be set here to any number between 1 and 15.
* If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings.
Press the Default key. The Default Setting screen will
appear.
Press the “Fax default” key.
(inch)
(metric)
Press the “T” key until “# of Rings” is highlighted.
Press the “Change #” key.
Use the “+” or “-” key to select the number of “rings”
before an incoming call is answered in each mode: the
Auto Fax Reception mode, the Auto FAX/TEL Switching
mode [this setting is not available in metric models] and
the TAD Reception mode.
(inch)
(metric)
Press the “Close” key. If you are finished making settings,
press the Reset key to return to the initial mode.
Setting the Number of Rings [Auto Fax Reception] (Number of Rings setting)
1
2
3
4
5
6