Filter
Top Products
Section 3 Fax Operation (Various Functions)
3-12
Modifying or Deleting Registered
Information
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
Press the “Register” key. The Registration Select screen
will appear.
(inch)
(metric)
Press the “Dial” key.
Press the speed-dial key (chain dial key) containing the
information you want to modify or delete.
* If that key is not displayed, use the “T” and/or “S”
cursor keys to switch to the screen that displays the key
that you want.
(inch)
(metric)
If you want to delete the registered chain dial key, press
the “Delete” key and then go to the next step.
If you want to modify the registered information, press
the “Change contents” key and then go directly to step 6.
(inch)
(metric)
> Deleting a chain dial key
Press the “Yes” key.
The message display will return to the same screen as
was displayed in step 3.
If you want to continue deleting other chain dial keys,
repeat steps 3 through 5. If you are finished deleting
chain dial keys, press the Reset key.
> Modifying registered information
If you want to modify the abbreviated number (the
displayed number of the speed-dial key under which the
chain dial key is registered), press the “Abbr. #” key.
If you want to modify any other basic information, press
the key that corresponds to that information. (To modify
information, refer to the corresponding step under
“Registering New Chain Dial Keys” on page 3-10.)
Enter the abbreviated number of an unregistered
speed-dial key (001 - 600).
* Once a 3-digit number is entered, that number may be
changed using the “+” and “-” keys.
(inch)
(metric)
1
2
3
4
5
6
7