Filter
Top Products
Section 5 Other Features of this Fax
5-16
Press the “Password” key.
If necessary, use the keypad to enter the predetermined
F-Code password.
* The password can be up to 20 digits in length and can
include any combination of the numerals 0 - 9 and the
symbols “*” and “#”.
* This password is not required if you agree in advance
with the destination party not to use one.
Press the “Close” key.
The message display will return to the same screen as
was displayed in step 2. You can now change any
transmission settings that you want or set the time for
the transmission to begin.
Press the Start key. The transmission operation will
begin.
Printing Out Documents from an
F-Code Confidential Box
Perform the following procedure to print out documents that have
been received into your F-Code Confidential Box. If the documents
are printed out correctly, the data will be deleted from that box.
If you are using an F-Code Confidential Box for F-Code Based
Bulletin Board Transmission and you want to delete that data,
simply print the documents out and the data will be deleted from
that box.
* If you registered “0000” as the F-Code password for your F-Code
Confidential Box, it is not necessary to enter a password just to
print out documents from that box.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
Press the “Application” key. The Application screen will
appear.
(inch)
(metric)
Press the “Sub.conf. box output” key.
(inch)
(metric)
6
7
8
9
1
2