Filter
Top Products
Section 3 Fax Operation (Various Functions)
3-17
Use the “T” and/or “S” cursor keys to switch to the
communication that you want.
(inch)
(metric)
Press the “Program/Change” key.
(inch)
(metric)
If you want to change the scheduled start time, press the
“Delayed TX” key and then go to the next step.
If you want to modify the destination information, press
the “” key and then go directly to step 8.
(inch)
(metric)
> Changing the scheduled start time
Use the keypad to enter the desired time for the
communication to begin.
* If you want to change the entered time, use the “W”
and/or “X” keys to move the cursor to the desired
location.
Press the “Close” key.
The message display will return to the same screen as
was displayed in step 5.
If you also want to modify the destination information,
press the “” key. If you do NOT want to modify the
information, go directly to step 16.
> Modifying destination information
The currently registered information will be displayed.
• If you want to delete a fax number(s), press the
corresponding speed-dial key (or keys) and then go to
the next step.
• If you want to add a fax number(s), press the “Add” key
and then go directly to step 11.
• If you want to change a fax number(s), press the
corresponding speed-dial key and then proceed directly
to step 13.
z Deleting fax numbers
Press the “Delete” key.
Press the “Yes” key.
The message display will return to the same screen as
was displayed in step 8 and you can continue to delete,
add or change other fax numbers. To do so, repeat steps 8
through 15.
If you are finished with this procedure, press the “Close”
key and go to step 16.
(inch)
(metric)
3
4
5
6
7
8
9
10