Xerox FAX System (J) Fax Machine User Manual


 
Section 2 Fax Operation (Basic Use)
2-6
<If the Documents Were Set on the Platen...>
Whenever you set the documents that you want to transmit on
the platen, close the Document Processor in order to allow the
machine to detect the size of those documents. If you are
transmitting information from books or other types of
documents that will not allow you to close the Document
Processor, it is necessary to indicate the document size
manually. (Refer to page 2-4.)
* In addition, any time you set documents on the platen for
transmission, a menu like that shown below will appear in
the message display once you press the Start key and the
documents have been scanned. In this case, perform the
following procedure.
> If you have more documents to send...
(1) Set the next page to be scanned on the platen.
* The next document(s) may also be set in the Document
Processor.
(2) Press the “Yes” key.
(inch)
(metric)
(3) Press the Start key.
* If you set the document(s) in the Document Processor,
scanning and then transmission of the documents will
begin automatically.
* Repeat steps (1) through (3) for all remaining documents.
> Once there are no further pages to be scanned...
(1) Press the “No” key. Transmission of the documents will
begin automatically.