Filter
Top Products
Section 3 Fax Operation (Various Functions)
3-14
You can modify certain information relating to a scheduled communication that uses the timer or even cancel the communication completely.
You can also print out a sample image of the corresponding documents as well as initiate (force-start) the communication without waiting for
the actually scheduled start time.
* If the scheduled communication begins automatically while you are in the middle of any editing operation, it will impossible to continue that
procedure.
Printing Out a Sample Image of Waiting
Documents
If you want to check the documents that correspond to a specific
transmission that is in memory and waiting for transmission, you
can print out a sample page of those documents.
* Even if you print out a sample image of the documents, the
transmission will be carried out on schedule.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
Press the “Application” key. The Application screen will
appear.
(inch)
(metric)
Press the “Reserved TX status” key.
The content of the first schedule communication will be
displayed.
(inch)
(metric)
Use the “T” and/or “S” cursor keys to switch to the
communication that you want.
(inch)
(metric)
Press the “Print” key.
(inch)
(metric)
Press the “Yes” key. A sample image of the corresponding
documents will be printed out.
Managing Information for a Scheduled Communication
(Editing a Communication in Memory)
1
2
3
4
5