Filter
Top Products
101
Control Panel Options
Control Panel Options
11/24/09 APL-I Reference Guide 14177L-003
33333
3
HEAD CLOSE
This allows you to set the action of the labels
when the printhead is closed.
Password protected.
33333
3
BACKFEED
This allows you to determine when and how
much label feedback occurs after a label is
removed.
Password protected.
33333
3
X FORMS ADJ.
This allows you to set how far from the left
edge of the label the format begins to print.
Important • Positive numbers adjust the label
away from the printhead. Negative numbers
adjust the labels close to the printhead.
33333
3
Y FORMS ADJ.
This allows you to adjust the print position
vertically on the label.
Important • Positive numbers adjust the label
away from the printhead. Negative numbers
adjust the labels close to the printhead.
33
3
HEAD TEST COUNT
The printer periodically performs a test of the
printhead functionality. This establishes how
many labels are printed between these internal
tests.
333
HEAD RESISTOR
This value is preset at the factory to match the
resistance value of the printhead. It does not
need to be changed unless the printhead or the
main logic board is replaced.
Important • If this needs to be changed, the
change should be done by a qualified service
technician.
3
3
VERIFIER PORT
This allows you to determine how the printer
reacts to the online verifier.
Password protected.
3
3
APPLICATOR PORT
This allows you to determine the action of the
verifier port.
Password protected.
Table 3 • Control Panel Differences on Supported Printers (Continued)
XiIIIPlus
Z4Mplus/Z6Mplus
105SL
ZM400/ZM600
PAX4
Xi4
Control Panel Option Details and Menu Choices