Filter
Top Products
Commands
Configuration Commands
40
14177L-003 APL-I Reference Guide 11/24/09
Label Retract Distance, Set
Purpose To set the label retract distance.
Syntax
<SI>rn
Not Supported This command does not work on the Zebra printer with APL-I, or it has
significant deviations from the 3400D printer.
Label Stock Type, Select
Purpose To set the media type.
Syntax
<SI>Tn
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes The n argument specifies the media type.
Default: n = 1
Values for n:
n = continuous media
1
= non-continuous media with web or gaps separating labels
2
= non-continuous media with marks separating labels
Label Width, Set
Purpose To determine the label width.
Syntax
<SI>Wn
Not Supported This command does not work on the Zebra printer with APL-I, or
it has significant deviations from the 3400D printer.