Filter
Top Products
Commands
Print Commands
30
14177L-003 APL-I Reference Guide 11/24/09
Numeric Field Separator
Purpose To identify numeric data in a field to increase or decrease.
Syntax
<FS>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes It is possible to have numerous data regions in one field as long as they do not
overlap. Depending on the value entered for the specific field, each data region separately
increments or decrements. The data length remains the same when setting values of
increments or decrements.
Important Values increase or decrease in a circular motion. For example, 9 increases to 0.
The printer does not recognize non-alphanumeric values.
Options Selected, Transmit
Purpose To transmit the selected options list.
Syntax
<ESC>O
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes Values returned by printer:
0 = No options selected
1 = Cutter
2 = Self Strip