Filter
Top Products
49
Commands
Program Mode Commands
11/24/09 APL-I Reference Guide 14177L-003
Code 128
Purpose To specify a Code 128 bar code field.
Syntax
c6,m1,m2
Partially Supported Based on testing, this command is partially supported on the Zebra
printer with APL-I firmware with the following differences and outputs:
•The
c6 command has one argument, m for mode, which defaults to 0.
• When more than 19 characters are specified as data, the first 19 are used as data
• When fewer than 19 are specified, data is zero-filled up to 19 characters. The first two
characters are not forced to be zeroes.
The Code 128 bar code supports these modes:
m Code 128 Mode
0 Printer provides two check digits.
1 Printer provides one check digit.
2 User provides two check digits, which are verified by the printer.
3 User provides one check digit, which is verified by the printer.