Filter
Top Products
71
Commands
Program Mode Commands
11/24/09 APL-I Reference Guide 14177L-003
Font Type, Select
Purpose To choose a font type for human-readable fields.
Syntax
cn,m
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes Depending on what human-readable fonts your printer supports, you can set n from 0
to 56.
Format, Create or Edit
Purpose To create or edit a format.
Syntax
A or F
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes If the format number is out of range, an error code 36 is generated.
Format Direction in a Page, Define
Purpose To determine the direction of a format on a page.
Syntax
qn
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Default Value: n = 0
Accepted values for n:
0 = Horizontal (all are rotated counterclockwise from horizontal)
1
= 90°
2
= 180°
3
= 270°