Filter
Top Products
69
Commands
Program Mode Commands
11/24/09 APL-I Reference Guide 14177L-003
Field, Delete
Purpose To delete field n from the format.
Syntax
Dn
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Default Value: n = 0
Accepted values for n: 0 – 199
Notes It is not allowable to delete the last field within a format. If the current field is deleted,
the field pointer will point to the next field. If the master field is deleted, all slave fields of the
master are deleted.
Field Data, Define Source
Purpose To determine a data source for the current field and how many characters are in the
field.
Syntax
dn,m1,m2
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Default values bar code fields: 0,20,0
Default values human-readable fields: 0,30,0
Accepted values for n:
0 = Data entered while in Print mode
1
= Data entered while in Print mode
2
= Data from field, m1
3
= Fixed data
Accepted values for m1 (d0 or d1): 0 - 3550