Filter
Top Products
Commands
Program Mode Commands
72
14177L-003 APL-I Reference Guide 11/24/09
Format, Erase
Purpose To erase a format.
Syntax
En
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Default Value: NONE
Accepted values for n: 1 – 19
Important Cannot erase format 0.
Format Offset Within a Page, Define
Purpose To determine the format offset within a page.
Syntax
On,m
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Default Value:
n
= 0
m
= 0
Accepted values for n and m:
n = 0 - 19999
m
= 0 - 19999
Format Position From Page, Delete
Purpose To delete a format from within a page.
Syntax
mp
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Default Value: p = a
Accepted values for p: a – z