Filter
Top Products
Commands
Program Mode Commands
50
14177L-003 APL-I Reference Guide 11/24/09
UPC/EAN
Purpose To specify a UPC/EAN bar code field.
Syntax
c7,m1,m2
Partially Supported Based on testing, this command is partially supported on the Zebra
printer with APL-I firmware with the following differences and outputs:
These label examples show the difference between labels when entered data is too long:
Bar codes not implemented: version D1-D5. When data entered is too long, an EAN-13 bar
code is printed.
Intermec 3400D Printer Label
APL-I Printer Label