Filter
Top Products
51
Commands
Program Mode Commands
11/24/09 APL-I Reference Guide 14177L-003
HIBC Code 39
Purpose To specify an HIBC Code 39 bar code field.
Syntax
c8 ,m1 ,m2
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes The c8 command has two arguments, m1 and m2, and m1 defaults to 0.
Default: m1 = 0
Values for m1 Supplier Std.:
0 = Primary format
1
= Backup Primary format
2,m2
= Second Data format. The linking character comes from the field identifier
(
,m2 value)
Values for m1 Provider Std.:
3 = Single format
4
= 1st data format
5,m2
= Second Data Format.
The linking character comes from the field identifier (,m2 value).
The HIBC Code 39 bar code supports these modes:
m1
HIBC Code 39 Mode
0
Primary format.
1
Alternate Primary format.
2, m2
Secondary format with m2 as the linkage character and field
identifier.
3
Single format.
4
First data format.
5, m2,
Second data format with m2 as the linkage character and field
identifier.
6
Multiple data format.