Filter
Top Products
Commands
Print Commands
32
14177L-003 APL-I Reference Guide 11/24/09
Print
Purpose To print the present page or format.
Syntax
<ETB>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes Prints the format with the data that was previously entered.
Printhead Parameters, Transmit
Purpose To send the number of dots and dot size in the printhead to the host.
Syntax
<ESC>H
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Example This is an example of a transmitted printhead parameter value: 895.5.0.
Program Mode, Enter
Purpose To switch to Program mode.
Syntax
<ESC>P
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes Using this command erases all previously entered data.
Program Number, Transmit
Purpose To send program and version number.
Syntax
<ESC>Mn
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes This command uploads the program number and software version to the host
computer. The data is represented as an ASCII alphanumeric character string.