Filter
Top Products
Commands
Program Mode Commands
68
14177L-003 APL-I Reference Guide 11/24/09
Command Tables, Load
Purpose To download a command table.
Syntax
C
Not Supported This command does not work on the Zebra printer with APL-I, or
it has significant deviations from the 3400D printer.
Current Edit Session, Save
Purpose To save the current page, format, UDC, or UDF being edited.
Syntax N
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes The current page, format, or UDC is automatically saved when you call a new one or
when you exit Program mode.
Data Source for Format in a Page, Define
Purpose To define a data source for a format assigned to a page position.
Syntax
en,m1,m2
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Default Value:
n
= 0
m
= a
m2
= 0
Accepted values for n:
0 = formats receive their data while in Print mode
1
= format is slave to another format on this page.