Filter
Top Products
87
Commands
Test and Service Commands
11/24/09 APL-I Reference Guide 14177L-003
User-Defined Characters (UDC) and Graphics, Print
Purpose To print the user-defined characters and graphics stored on the printer.
Syntax
g
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
User-Defined Fonts, Print
Purpose To print the user-defined fonts stored on the printer.
Syntax
t
Partially Supported Based on testing, this command is partially supported on the Zebra
printer with APL-I firmware with the following differences and outputs:
Notes There are slight differences in spacing, and it is optimized for 4 in. x 6 in. label.