Filter
Top Products
23
Commands
Print Commands
11/24/09 APL-I Reference Guide 14177L-003
Clear All Data
Purpose To clear data from previous format.
Syntax
<CAN>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes After you select:
• a format; the pointer specifies the first field
• a page; the pointer specifies the first data field in the format.
Clear Data From Current Field
Purpose To clear data from present field.
Syntax
<DEL>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes After clearing the data, the field pointer continues to specify the current field.
Command Terminator 1
Purpose To stop the present command.
Syntax
<NUL>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Command Terminator 2
Purpose To stop the present command.
Syntax
<LF>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.