Filter
Top Products
Commands
Test and Service Commands
84
14177L-003 APL-I Reference Guide 11/24/09
Printhead Temperature Sensor Value, Transmit
Purpose To send the printhead thermistor A/D output back to the host.
Syntax
p
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Reflective Sensor Value, Transmit
Purpose To send the label mark reflective sensor A/D output back to the host.
Syntax
M
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.