Filter
Top Products
Commands
Program Mode Commands
62
14177L-003 APL-I Reference Guide 11/24/09
MicroPDF417
Purpose To specify a MicroPDF417 bar code field.
Syntax
c19,m1,m2
Partially Supported Based on testing, this command is partially supported on the Zebra
printer with APL-I firmware with the following differences and outputs:
These label examples show the bar code position might differ when the bar code is rotated
180 degrees:
The c19 command has 2 arguments.
When rotated 180 degrees, bar code position could differ.
Intermec 3400D Printer Label
APL-I Printer Label