Filter
Top Products
27
Commands
Print Commands
11/24/09 APL-I Reference Guide 14177L-003
First Data Entry Field, Select
Purpose To set the first data entry field to receive print mode data.
Syntax
<ACK>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes If you do not want to use a number to select a data field, this command ensures that
the data prints in the lowest numbered field.
Font, Transmit
Purpose To upload printer fonts.
Syntax
<ESC>vn
Not Supported This command does not work on the Zebra printer with APL-I, or it has
significant deviations from the 3400D printer.
Form Feed
Purpose To feed a label.
Syntax
<FF>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes Things to be aware of:
• When printing on non-continuous media, the label is appropriately fed to the tear bar
at its mark, gap, or web.
• When using continuous media, the printer feeds the label by the specified amount.
When printing on self-strip media, the printer feeds one blank label.