Filter
Top Products
Commands
Program Mode Commands
52
14177L-003 APL-I Reference Guide 11/24/09
Code 16K
Purpose To specify a Code 16K bar code field.
Syntax
c9
Partially Supported Based on testing, this command is partially supported on the Zebra
printer with APL-I firmware with the following differences and outputs:
• The Zebra printer with
APL-I firmware does not support linked bar codes, or using a
set of bar codes to print a single data string too large for one bar code.
Code 49
Purpose To specify a Code 49 bar code field.
Syntax
c10
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes Things to be aware of:
• The c10 command has no arguments.
•Use a
<SUB> 1 command to symbolize the function 1 character in Emulation mode.
If using Advanced mode, you can symbolize the function 1 character by using the
<SUB><SUB> 1. The same holds true for function characters 2, 3, and 4.
• To call up a square symbol in Advanced mode, use a height magnification of 1. While
in Emulation mode, use a magnification of 250.
Important Only Alphanumeric (0) and numeric (2) modes are supported by the printer.