Filter
Top Products
Commands
Program Mode Commands
60
14177L-003 APL-I Reference Guide 11/24/09
Data Matrix Symbology Versions ECC-100 and ECC-200
Purpose To specify a Data Matrix Symbology Versions ECC-100 and
ECC-200 bar code field.
Syntax
c17,m1,m2,m3,m4,m5,m6
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes This command selects the Data Matrix symbology. Data Matrix is a 2d symbology
consisting of square modules arranged within a finder pattern. The 2 versions of Data Matrix
that are supported are ECC-100 and ECC-200.
The names, purposes, and default values of these parameters are listed below:
Argument Purpose Default Value
m1 Enhanced error correction 200 200
m2 Square mode 0
m3 Position of current symbol in group 0
m4 Total number of symbols in group m3 parameter
m5 File ID number 1
m6 File ID number 1