Filter
Top Products
109
Control Panel Options
S4M LCD Options
11/24/09 APL-I Reference Guide 14177L-003
Table 5 shows the protected menu for ADVANCED SETUP 3. To access this, see S4M
Password Protected Menus on page 106.
Table 5 • S4M Protected Menu
LCD Details
PRINT OUT
This allows you to print certain types labels with specific
printer information.
PRINT PAGE
This allows you to print the stored APL-I page.
PRINT FORMAT
This allows you to store and print up to 100 formats.
PARALLEL COMM.
This allows you to select a communications port. It must
match the one being used by the host.
BAUD
This allows you to select a baud rate. It must match the rate
being used by the host.
DATA BITS
This allows you to select the data bits. It must match the data
bits being used by the host.
STATUS RESP
This determines if a response is sent after inquiry commands.
PARITY
This allows you to select the parity. It must match the parity on
the host.
HOST HANDSHAKE
This allows you to select the handshake protocol. It must
match the protocol on the host.
ACTIVE PRINTSRVR
This allows you to see which print server is being used.
OBTAIN IP ADDRESS
This allows you to select the method by which an IP address
will be assigned to the printer.
IP PROTOCOL
The allows you to see if the user (permanent) or the server
(dynamic) selects the IP address.
IP ADDRESS
This allows you to modify this setting, only when Permanent is
select for OBTAIN IP ADDRESS.
SUBNET MASK
This allows you to view the subnet mask.
DEFAULT GATEWAY
This allows you to view the default gateway.
HEXDUMP
This allows you to check the connection between the printer
and the host computer.
CHANGE RTC DATE
This allows you to view the current date and change the date.
CHANGE RTC TIME
This allows you to view the current time and change the time.
LOAD DEFAULTS
This allows you to reset the parameters back to the factory
default settings.
DEFAULT NET
This restores the wired and wireless network settings back to
factory defaults.
INIT FLASH MEM
This allows you to reformat your Flash memory.